To print double-sided, all you have to do is open the print window, find the option "Print on both sides" (sometimes it appears as "duplex" or "double-sided"), and choose whether to flip on the long edge or the short edge. If your printer doesn't have that option, you can also do it by hand: print the odd pages first, turn the paper over, and then print the even pages.
It sounds simple when put like that, but anyone who has tried it knows the hard part is loading the sheets into the tray correctly. One wrong turn is enough for page 2 to come out upside down or behind page 5, and then you have to throw away sheets and start again.
In this guide I explain how to print double-sided with and without an automatic printer, how to run a quick test so you don't get it wrong, which edge to choose depending on the document, and what to do if you print from your phone. Printing on both sides uses half the paper and makes documents less bulky, so it's worth learning to do it properly once.
Check whether your printer prints double-sided automatically
First, it helps to know what type of printer you have, because the method changes completely. There are two possibilities:
- Automatic duplex: the printer flips the sheet by itself. You just tick the option and wait.
- Manual duplex: the printer prints one side and asks you (or not) to turn the paper over. You do the flipping.
To find out, try one of these ways:
- Open any document, click print, and see whether "Print on both sides" or "Double-sided" appears with a long edge and short edge option. If it's there and doesn't say "manual", it's normally automatic.
- Check the manual or the spec sheet for your model and look for the word "duplex".
- Watch the printer while it prints: if the sheet goes in, comes out a little, and goes back in, it has automatic duplex.
Many simple home printers don't have it, so don't worry if yours is a manual one. With a small trick it turns out just as well.
How to print double-sided automatically
If your printer supports it, the process takes only a few seconds. These are the general steps, which are very similar on any computer and in any program:
- Open the document (a PDF, a word processor file, a spreadsheet...).
- Click File > Print or use the keyboard shortcut for printing.
- Choose your printer from the list.
- Look for the section about sides. Depending on the program, it may be in plain view or inside "Properties", "Preferences" or "More options".
- Select Print on both sides and choose flip on long edge (the usual choice for portrait documents).
- Check the preview and click print.
If you can't see the option even though your printer has duplex
Sometimes the option exists but is hidden or disabled. Try this:
- Open the printer properties from the print window, not from the program.
- Check that you have the correct driver for your model installed and not a generic one.
- Make sure the paper size is regular A4: some thick, photo or adhesive papers don't support automatic double-sided printing.
If you often print planner sheets, schedules or lists for the whole week, double-sided printing lets you fit two days or two lists on a single sheet and take up much less space in your folder.
How to print double-sided manually, step by step
This is the part where most people make mistakes. The key is to do a test with a single sheet before sending the whole document. It takes a minute and saves you a lot of paper.
The mark test
- Take a sheet of paper and draw a small pencil arrow pointing toward the inside of the printer, on the side that faces up.
- Put it in the tray as usual and print any page.
- Look at where the text ended up: on the arrow side or the other one, and whether the arrow is at the top or bottom relative to the text.
That tells you how your printer "eats" paper: which side it prints on and which way it goes in. Write it on a sticky note and stick it on the printer itself, so you never have to repeat the test.
Printing odd and even pages
- In the print window, find the pages section and choose Odd pages only.
- Print. Pages 1, 3, 5, 7... will come out.
- Pick up the stack without shuffling it. Based on what you saw in the test, turn it over and put it back in the tray.
- Now choose Even pages only. If your printer leaves the sheets face up, you may also need to tick Reverse order so that page 2 lands behind page 1.
- Print and check the first few sheets.
Some printers without automatic duplex offer the option "Manual double-sided": they print the first batch and show you a message on screen explaining how to reload the paper. If yours has it, use it, because it saves you from having to think about the order.
If the document has an odd number of pages
For example, 7 pages. You will print 4 odd pages (1, 3, 5 and 7) and only 3 even ones. Before the second batch, remove the last sheet (the one with page 7), which is left alone with a single printed side, and load the rest. If you don't, page 2 will end up behind page 7 and everything gets out of line.
Long edge or short edge: which to choose
This option decides which way you "turn the page". Choosing wrong makes the back side come out upside down, something you often see in leaflets and calendars.
| Type of document | Orientation | Recommended option |
|---|---|---|
| Notes, letters, reports | Portrait | Long edge |
| Book or dossier that is turned like a book | Portrait | Long edge |
| Wall calendar or pad that flips upward | Portrait | Short edge |
| Presentations, wide tables | Landscape | Short edge |
| Booklet folded in half | Landscape (two pages per side) | Short edge |
A trick to remember: think about where you are going to staple or bind. If it's along the long side, choose long edge. If it's along the top, like a calendar, choose short edge. If you want to go a step further and put together a little booklet, there is a guide on how to print a PDF as a book or booklet at home.
While the printer finishes a long batch of sheets, there's no need to stand and watch it: it's a good moment to take a short break and clear your head for a few minutes.
How to print double-sided from your phone
We increasingly print straight from our phones, and double-sided printing can be turned on there too. The general procedure is this:
- Open the document or image and tap the share button or the three-dot menu.
- Choose Print and select your printer (it has to be on the same wifi network).
- Open the print options and look for Double-sided or Two-sided.
- Choose long or short edge and send.
If the option doesn't appear, your printer may not have automatic duplex, or your phone may not recognize that function. In that case, use the manual odd and even method from the printer's own app, which usually offers more settings. If it's your first time printing this way, it will help to read how to print from your phone step by step.
For example, with the app Canvartin: Planner and Appointments you can print planners on A4, blank or already filled in with your tasks and appointments (it's a Premium feature, which can also be earned as a reward). Printing two weeks on a single sheet, one on each side, is a practical way to use less paper.
Common mistakes and how to avoid them
These are the mistakes that come up most often when printing double-sided at home:
- The back side comes out upside down: you chose the wrong edge or turned the stack the wrong way. Repeat the mark test.
- The pages come out out of order: you forgot to tick "Reverse order" for the second batch or you shuffled the stack when picking it up.
- Jams on the second pass: freshly printed paper can be slightly curled or warm. Let it rest for a minute and fan the sheets before loading them.
- Forgetting the leftover sheet: with odd-numbered documents, remove the last sheet before printing the even pages.
- Too many sheets at once: in manual mode, batches of 10 or 20 sheets are better. If something goes wrong, you lose less paper.
- Printing without a preview: check that there are no blank pages at the end, because they shift the whole order.
Paper and tips for a cleaner result
The paper matters too. With a very thin sheet, what is printed on the back shows through and is hard to read. Some ideas:
- For everyday use, 80 g/m² paper works well double-sided. If you are going to print a lot of color or images, 90 or 100 g/m² paper shows through less. You can find more detail on types and sizes of paper for printing at home.
- Turn on draft mode or ink-saving mode for reference documents: less ink, less show-through and less drying time.
- If you are going to bind it, leave a bit more margin on the spine side. You can see ideas for binding loose sheets at home without a machine.
- Combine double-sided printing with "2 pages per sheet" for notes or drafts: four pages fit on a single sheet.
Printing on both sides is one of those small habits that, added to others, help you spend less at home: a pack of paper lasts you twice as long and you use your cartridges more wisely.
Frequently asked questions
How do I know if my printer prints double-sided?
Open the print window and look for "Print on both sides" or "duplex". If it appears without the word "manual", it most likely does it on its own. You can also check the spec sheet for your model.
Which is better, long edge or short edge?
For portrait documents that are read like a book, long edge. For landscape documents or calendars that flip upward, short edge.
Why does the second side come out upside down?
Because the paper was placed turned around in the tray or because you chose the wrong edge. Do the arrow test with one sheet and note down how it needs to be loaded.
Can you print a single-page document double-sided?
It makes no sense with a single page, but if you want to repeat the same content on the back, duplicate the page in the document and then print it double-sided.
Can any paper be used to print on both sides?
Regular 80 g/m² paper works. Photo paper, adhesive paper, or paper that is glossy on one side only are not designed for it and can jam or give poor results.
